Sponge Foaming Material manufacturers Features Polyether Polyol for PU foaming General Properties and Applications POLYETHER POLYOL is a 3,000 molecular weight polyether triol. It is used to produce flexible PU foam and mattress, etc. Technical Data Sheet PropertyValueUnit of measurement Hydroxyl number56卤2mg KOH/g Moisture鈮?.05% by wt. Acidity鈮?.05mg KOH/g Viscosity 25鈩?/p>400-650mPa.s PH5.5-7.5---------------------------- Color (APHA)鈮?0掳St Solid conten24.0-27.0% by wt. Appearancetransparent,colorless liquid---------------------------- Sampling Moisture access must be prevented when taking product samples. Handling Precautions Flash point of Polyether Polyol for PU foaming exceeds 150 degree Celsius (close cup, ASTM D-93 method). The polyol is flammable but non-explosive. In case of fire, put the fire out with foams, dry powder, steam or water. In the handling of the polyol, precautions should be taken to avoid exposure to eyes or prolong contact with the skin. If eye contact occurs, flush with plenty of water. If skin contact occurs, wash exposed areas thoroughly with soap and water. Storage The polyol should be stored in sealed steel drum. Contact with air should be prevented. It is slightly hygroscopic and may absorb moisture. Containers should be kept sealed and protected from contamination of moisture and foreign materials. The shelf life is 12 months. After this period, pre-test should be made before use. Our Service 24hours ServiceRich experienceHigher loyaltyBetter commitment 1. Goods: manufacturing and packaging the goods according to the clients' request. 2. Quality: testing the final products before packing. Under Advanced equipment, strict quality control 3. Document: Full set of docs will be prepared accurately and thoughtfully 4. Shipment: timely and efficient vessel 5. Samlpes: Sample(250g or 500g) can be available for your test. 6. After-Sales Service Any questions about the product and vessel info can be traced at any time. You are welcome to contact us for any question!Sponge Foaming Material manufacturers website:http://www.demingmachinery.com/sponge-foaming-material/